High quality Professional hair removal wax with TITANIUM DIOXIDE now is available in 50ml wax cartridges
(fit to Veet easy wax electrical wax heater ) wax heater not included
Producer: KITLAS Cosmetics
7 Steps to Salon-Perfect Results in your own home:
1. Insert the wax refill into the device.
2. Plug the electrical cable into the device and in the socket. The red light turns on to confirm the device is heating. Place the plugged device on its base and leave it connected for 20min. After 20min the wax is ready for application. Start to apply the wax to a small area first, to check that the wax applies easily. If the wax does not easily roll onto the skin, let the device warm the wax for at least an additional 5min. The wax is ready when it glides out of the roller easily and applies evenly to the skin. Do not allow the wax to come into contact with water as it would become ineffective.
3. Apply the wax in the direction of hair growth (from knee to ankle for legs). Check that the slanted side of the roller head is in contact with the skin during application to allow the roller to glide over the skin.
4. Immediately place the strip over the layer of wax, ensuring that there is at least 1cm at the bottom which is wax free. Rub the strip repeatedly over the wax in the direction of hair growth.
5. Hold your skin taut to avoid discomfort. Holding the bottom of the strip, very quickly and in one swift motion, pull the strip back on itself against the direction your hair grows (from ankle to knee for legs) keeping the strip as close to the skin as possible. The FASTER you remove the strip the more effective it will be.
6. When you have finished waxing, remove any wax residues from your skin with a after wax oil . THIS WAX CANNOT BE RINSED OFF WITH WATER.
7. Unplug the device. After use the refill will be hot – Allow it to cool down before removing the refill from the device.
|NO MINIMUM ORDER!||DELIVERY ONLY £2.99|| FREE DELIVERY OVER £20|